September 19, 2017

Chibi Charmander

By Janet Carrillo "damn it Janet, let's crochet!"
The flame that burns at the tip of its tail is an indication of its emotions.

SIZE/MEASUREMENTS
approx. 3"height x 3.5"length

MATERIALS
*Crochet hook size: 3.5mm (E)
*Worsted Weight Yarn: Orange (34yds) & Yellow (1yds)
*Fiberfill
*Felt: Black, White & Yellow
*Stitch Markers to mark your rounds
*Tapestry Needle
*Matching Thread
*Hot Glue
*Pipe Cleaner

PATTERN NOTES - must read...
 Numbers in ( ) at the end of each round/row indicate the total number of stitches.
 Always use stitch markers to mark your rounds.
 There's no need to sl st and/or ch when going to the next round unless stated to do so.
 Always do the 1st stitch where you slip stitch from the previous round.
 The chain, in the beginning, does NOT count as one stitch unless stated otherwise.
 You slip stitch on the first sc, not on top of the chain 1.
It is said that a Charmander dies if its flames ever goes out.

HEAD/BODY with orange
  Rnd 1: 6sc in magic ring (6)
  Rnd 2: 2sc in each st around (12)
  Rnd 3: sc in next st, 2sc in next st around (18)
  Rnd 4: sc in next 2 sts, 2sc in next st around (24)
  Rnd 5: sc in next 3 sts, 2sc in next st around (30)
  Rnd 6: sc in next 4 sts, 2sc in next st around (36)
  Rnd 7: sc in next 11 sts, 2sc in next st around (39)
  Rnd 8-13: sc in each st around (39)
  Rnd 14: sc in next 11 sts, sc2tog around (36)
  Rnd 15: sc in next 4 sts, sc2tog around (30)
  Rnd 16: sc in next 3 sts, sc2tog around (24)
Start stuffing the balloon moderately firm.
  Rnd 17: sc in next 2 sts, sc2tog around (18)
  Rnd 18: sc in next st, sc2tog around (12)
  Rnd 19: sc2tog around (6)
F/O and leave a tail for closing. Add any bits of stuffing need it to finish shaping the balloon. Weave in the tail through the final round and draw up tight to close. Secure and weave in the ends.

FEET with orange; make 2
  Rnd 1: 5sc in magic ring (5)
  Rnd 2: *sc in next st, 2sc in next st* repeat from * to * 1 more time, sc in last st (7)
  Rnd 3: working in back loops for this round only sc in each st around (7)
  Rnd 4: sc in each st around (7)
F/O, secure and weave in the ends.

ARMS with orange; make 2
  Rnd 1: 4sc in magic ring (4)
  Rnd 2: sc in next st, 2sc in next st around (6)
  Rnd 3: sc in each st around (6)
F/O, secure and weave in the ends.

TAIL with orange
  Rnd 1: 4sc in magic ring (4)
  Rnd 2: sc in each st around (4)
  Rnd 3: sc in next st, 2sc in next 2 sts, sc in next st (6)
  Rnd 4: sc in each st around (6)
  Rnd 5: sc in next 2 sts, 2sc in next 2 sts, sc in next 2 sts (8)
  Rnd 6: sc in each st around (8)
  Rnd 7: sc in next 3 sts, 2sc in next 2 sts, sc in next 3 sts (10)
  Rnd 8-9: sc in each st around (10)
  Rnd 10: sl st in next 2 sts to give it an even finish
F/O, secure and weave in the ends.


ASSEMBLE
    I recommend pinning the pieces in place before sewing them to make sure you have them in the position you like best before sewing. (Most people like to use the yarn at the end of the finished pieces to sew them in place, but I personally like to use matching thread).
    TIP...For anything that I’m going to be using felt, I like to first sketch it out on a white paper and make a stencil of what I need. Then cut it out. Then tape the stencil to the felt and cut it out.
     TUMMY SPOT...using yellow felt make a circle with a diameter of 2". Place it between round 10 and 18.
     FEET...if you haven't already stuff them lightly. Place them in round 15 and 17; approx. 1.25" apart.
     ARMS...there's no need to stuff them, simply flatten them out. Place them above the feet on round 10 and 12.
     TAIL...insert a pipe cleaner inside the tail and add any stuffing needed to finish shaping the tail nicely. Find the middle of the back and place it between round 13 and 15.
Using yellow felt, make a triangle as long as the tail and glue it to the back of it.
For the flame...with orange and yellow yarn, cut about 5 strands (2" in length) of each color. And place them on the tip of the tail. Insert crochet hook in the tip, fold the strand of yarn in half and draw it up, push the folded end through. Brush out the strands. Once this has been done, bent the tail upward.
     EYES...with black felt make 2 circles and with white make 2 smaller circles. Place the black eyes on round 7 and 8; approx 0.75" apart. Put the white circles above the black eyes.
     MOUTH...using thread or embroidery floss make its mouth on round 9. You can play around with it and make it however you like, the possibilities are endless.

GLOSSARY:
sc: single crochet || st/s: stitch/es || sc2tog: single crochet 2 stitches together || rnd: round || f/o: finish off



Don't forget to like this blog facebook fan page.
Or to follow our Instagram page. :)

Have a nice crochet time!
- Janet

Charmander and Pokémon are copyright by The Pokémon Company.
This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (September 2017). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

September 17, 2017

Chibi Bulbasaur

By Janet Carrillo "damn it Janet, let's crochet!"
Bulbasaur is extremely tough and very difficult to capture in the wild.

SIZE/MEASUREMENTS
approx. 3"height x 3.5"length

MATERIALS
*Crochet hook size: 3.5mm (E)
*Worsted Weight Yarn: Jade (31yds) & Tea Leaf (5yds)
*Fiberfill
*Felt: Black, White & Dark Green
*Stitch Markers to mark your rounds
*Tapestry Needle
*Matching Thread
*Hot Glue

PATTERN NOTES - must read...
 Numbers in ( ) at the end of each round/row indicate the total number of stitches.
 Always use stitch markers to mark your rounds.
 There's no need to sl st and/or ch when going to the next round unless stated to do so.
 Always do the 1st stitch where you slip stitch from the previous round.
 The chain, in the beginning, does NOT count as one stitch unless stated otherwise.
 You slip stitch on the first sc, not on top of the chain 1.

SPECIAL STITCHES
Surface Slip Stitch - check this VIDEO out on how to since we will be doing this for the sprout in the assembling process.
Researchers are unsure whether to classify Bulbasaur as a plant or animal.

HEAD/BODY with jade
  Rnd 1: 6sc in magic ring (6)
  Rnd 2: 2sc in each st around (12)
  Rnd 3: sc in next st, 2sc in next st around (18)
  Rnd 4: sc in next 2 sts, 2sc in next st around (24)
  Rnd 5: sc in next 3 sts, 2sc in next st around (30)
  Rnd 6: sc in next 4 sts, 2sc in next st around (36)
  Rnd 7: sc in next 11 sts, 2sc in next st around (39)
  Rnd 8-13: sc in each st around (39)
  Rnd 14: sc in next 11 sts, sc2tog around (36)
  Rnd 15: sc in next 4 sts, sc2tog around (30)
  Rnd 16: sc in next 3 sts, sc2tog around (24)
Start stuffing the balloon moderately firm.
  Rnd 17: sc in next 2 sts, sc2tog around (18)
  Rnd 18: sc in next st, sc2tog around (12)
  Rnd 19: sc2tog around (6)
F/O and leave a tail for closing. Add any bits of stuffing need it to finish shaping the balloon. Weave in the tail through the final round and draw up tight to close. Secure and weave in the ends.

EARS with jade; make 2
  Rnd 1: 4sc in magic ring (4)
  Rnd 2: 2sc in each st around (8)
  Rnd 3: sc in each st around (8)
F/O, secure and weave in the ends.

SPROUT with tea leaf
  Rnd 1: 4sc in magic ring (4)
  Rnd 2: 2sc in each st around (8)
  Rnd 3: sc in each st around (8)
  Rnd 4: sc in next st, 2sc in next st around (12)
  Rnd 5: sc in next 2 sts, 2sc in next st around (16)
  Rnd 6: sc in next 3 sts, 2sc in next st around (20)
  Rnd 7: sc in each st around (20)
F/O, secure and weave in the ends.

FEET with jade; make 2
  Rnd 1: 5sc in magic ring (5)
  Rnd 2: *sc in next st, 2sc in next st* repeat from * to * 1 more time, sc in last st (7)
  Rnd 3: working in back loops for this round only sc in each st around (7)
  Rnd 4: sc in each st around (7)
F/O, secure and weave in the ends.

ARMS with jade; make 2
  Rnd 1: 4sc in magic ring (4)
  Rnd 2: sc in next st, 2sc in next st around (6)
  Rnd 3: working in back loops for this round only sc in each st around (6)
F/O, secure and weave in the ends.


ASSEMBLE
    I recommend pinning the pieces in place before sewing them to make sure you have them in the position you like best before sewing. (Most people like to use the yarn at the end of the finished pieces to sew them in place, but I personally like to use matching thread).
    TIP...For anything that I’m going to be using felt, I like to first sketch it out on a white paper and make a stencil of what I need. Then cut it out. Then tape the stencil to the felt and cut it out.
     EARS...there's no need to stuff them, simply flatten them out. Place them on round 4 and 7.
     FEET...if you haven't already stuff them lightly. Place them between round 15 and 17; approx. 1.25" apart.
     ARMS...there's no need to stuff them. Place them just above the feet between round 11 and 12.
     SPROUT...use the surface slip stitch to make the lines on top of the shell with black thread or embroidery floss. They don't need to be perfect; these can be done however you like.
Stuff it moderately firm. Place it over on the back of the body between round 8 and 14.
     EYES...with black felt make 2 circles and with white make 2 smaller circles. Place the black eyes on round 8 and 9; approx 1" apart. Put the white circles above the black eyes.
      SPOTS...using green felt make as many you like in any shape. Glue them around the body.
     MOUTH...using thread or embroidery floss make its mouth on round 10. You can play around with it and make it however you like, the possibilities are endless.

GLOSSARY:
sc: single crochet || st/s: stitch/es || sc2tog: single crochet 2 stitches together || rnd: round || f/o: finish off



Don't forget to like this blog facebook fan page.
Or to follow our Instagram page. :)

Have a nice crochet time!
- Janet

Bulbasaur and Pokémon are copyright by The Pokémon Company.
This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (September 2017). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.

September 9, 2017

Chibi Jigglypuff

By Janet Carrillo "damn it Janet, let's crochet!"
When its huge eyes light up, it sings a mysteriously soothing melody that lulls its enemies to sleep.

SIZE/MEASUREMENTS
approx. 3"height x 3.5"length

MATERIALS
*Crochet hook size: 3.5mm (E)
*Worsted Weight Yarn: Light Pink (44yds)
*Fiberfill
*Felt: White, Light Blue & Black
*Stitch Markers to mark your rounds
*Tapestry Needle
*Matching Thread
*Hot Glue

PATTERN NOTES - must read...
 Numbers in ( ) at the end of each round/row indicate the total number of stitches.
 Always use stitch markers to mark your rounds.
 There's no need to sl st and/or ch when going to the next round unless stated to do so.
 Always do the 1st stitch where you slip stitch from the previous round.
 The chain, in the beginning, does NOT count as one stitch unless stated otherwise.
 You slip stitch on the first sc, not on top of the chain 1.
When Jigglypuff's song puts its listeners to sleep, it would inflate angrily
and draw on the sleeping listener's faces with markers.

HEAD/BODY with light pink
  Rnd 1: 6sc in magic ring (6)
  Rnd 2: 2sc in each st around (12)
  Rnd 3: sc in next st, 2sc in next st around (18)
  Rnd 4: sc in next 2 sts, 2sc in next st around (24)
  Rnd 5: sc in next 3 sts, 2sc in next st around (30)
  Rnd 6: sc in next 4 sts, 2sc in next st around (36)
  Rnd 7: sc in next 11 sts, 2sc in next st around (39)
  Rnd 8-13: sc in each st around (39)
  Rnd 14: sc in next 11 sts, sc2tog around (36)
  Rnd 15: sc in next 4 sts, sc2tog around (30)
  Rnd 16: sc in next 3 sts, sc2tog around (24)
Start stuffing the balloon moderately firm.
  Rnd 17: sc in next 2 sts, sc2tog around (18)
  Rnd 18: sc in next st, sc2tog around (12)
  Rnd 19: sc2tog around (6)
F/O and leave a tail for closing. Add any bits of stuffing need it to finish shaping the balloon. Weave in the tail through the final round and draw up tight to close. Secure and weave in the ends.

EARS with light pink; make 2
  Rnd 1: 4sc in magic ring (4)
  Rnd 2: sc in next st, 2sc in next st around (6)
  Rnd 3: sc in next 2 sts, 2sc in next st around (8)
  Rnd 4: sc in next 3 sts, 2sc in next st around (10)
  Rnd 5-7: sc in each st around (10)
  Rnd 8: sl st in next 2 sts to give it an even finish
F/O, secure and weave in the ends.

FEET with light pink; make 2
  Rnd 1: 6sc in magic ring (6)
  Rnd 2: 3sc in next st, sc in next 2 sts around (10)
  Rnd 3-4: sc in each st around (10)
  Row 1: stuffed lightly, flatten to match up the stitches and sc across, ch1, turn (5)
  Row2: sc2tog, sc in next st, sc2tog (3)
F/O, secure and weave in the ends.

ARMS with light pink; make 2
  Rnd 1: 4sc in magic ring (4)
  Rnd 2: sc in next st, 2sc in next st around (6)
  Rnd 3: sc in each st around (6)
F/O, secure and weave in the ends.

TUFT of FUR with light pink
  Rnd 1: 6sc in magic ring (6)
  Rnd 2: sc in each st around (6)
  Rnd 3: sc in next st, 2sc in next st around (9)
  Rnd 4: sc in each st around (9)
  Rnd 5: sc in next 2 sts, 2sc in next st around (12)
  Rnd 6-10: sc in each st around (12)
Stuffed the fur lightly.
  Rnd 11: sc2tog around (6)
F/O and leave a tail for closing. Add any bits of stuffing need it to finish shaping the fur. Weave in the tail through the final round and draw up tight to close. Secure and weave in the ends.


ASSEMBLE
    I recommend pinning the pieces in place before sewing them to make sure you have them in the position you like best before sewing. (Most people like to use the yarn at the end of the finished pieces to sew them in place, but I personally like to use matching thread).
    TIP...For anything that I’m going to be using felt, I like to first sketch it out on a white paper and make a stencil of what I need. Then cut it out. Then tape the stencil to the felt and cut it out.
     EARS...there's no need to stuff them, simply flatten them out. Place them on round 4 and 8.
     FEET...try to find the position you like best. I place mine between round 17 and 18; approx. 1/2" apart. Only sew the 2 last rows from the feet (flat area) to the body.
     ARMS...place them right beneath the ears between round 10 and 12. There's no need to stuff them.
     TUFT of FUR...place it between the ears on round 1 and 7. The end of the fur bent it slightly towards the right.
     INNER EARS...using black felt make 2 slightly smaller triangles than the crochet ears. Glue them in place.
     EYES...using white felt make 2 circles. With light blue, make 2 slightly smaller circles than the white ones. Finally make 2 tiny white circles. Place the big white ones between rounds 8 and 11; approx. 1" apart. Place the light blue ones on top of the white ones and the tiny white circles in the position you like best.
     MOUTH...using black thread or embroidery floss make its mouth between round 12 and 13. You can play around with it and make it however you like, the possibilities are endless.

GLOSSARY:
ch/s: chains/s || sc: single crochet || sl st: slip stitch || st/s: stitch/es || sc2tog: single crochet 2 stitches together
rnd: round || f/o: finish off



Don't forget to like this blog facebook fan page.
Or to follow our Instagram page. :)

Have a nice crochet time!
- Janet

Jigglypuff and Pokémon are copyright by The Pokémon Company.
This pattern is an original pattern by Janet Carrillo "damn it Janet, let's crochet!" (September 2017). Please do not claim this pattern as your own. If you wish to share this pattern, you may link to this pattern but please do not reprint/repost it on your site. You may print and keep a copy for your own personal use. Please do not resell or distribute it.